NEW TECHNIC, SiC CERAMIC MEMBRANE, 15 YEARS FACTORY
1）Long service life could be up to 5 years;
2）Good chemical resistanc，anti-acid， alkali and organic solvent
3）Thermally stable，withstand 800℃
4）50% porosity ensures big flux
5）More hydrophilic， superior oil/water separation performance
6）Easy to install ，and less installation space
7）Lower operation pressure（1-2bar），less power consumption
8）Easy cleaning, high recovery rate and recycling after backwash
9）High hardness （between corundum and diamond）and abrasion resistance
10）No secondary contamination，no negative impact on filtered medium
1. Application Field:
Industrial wastewater, domestic sewage, reverse osmosis system (RO) pretreatment, solid-liquid separation, material clarification of the filter Wide Application Field
Uses: MBR, suspended solids / bacteria removal, water recycling reuse
2. Advantages of Ceramic plate membrane module
2.1 Strengthened Membrane
A variety of solvent, oil and chemical substances in industrial wastewater treatment.
Removal of solid suspended solids (SS).
Simplify Pretreatment of membrane filtration.
2.2 High reliability
No membrane damage.
Deterioration caused by medicine effect or heat is less, and longer life than organic film.
High flow and stable filtration, smaller setting area compare to organic flat film.
2.3 Energy Saving
The rising water flow formed by the membrane cleaning gas can effectively remove the dirt adhering to the film surface.
In the MBR system, the amount of membrane cleaning gas can be reduced according to the shape of the flat film and the unique dispersion system, realizing energy savings.
2.4 Easy to maintain
Routine maintenance can be exempt through backwashing and the use of online liquid cleaning automation.The dirt attached to surface of the membrane can be easily removed by high pressure water.
2.5 Environmental friendly
The Ceramic plate membrane can be recycled for other ceramic products, thereby reducing waste.
Compare with organic film
Hollow Fiber Film
Outside Suction Inner Suction filter method
Effective membrane area
Pure water through performance
40 m3/(m2-d) (100 kPa, 25℃)
Particle capture performance
0.1μm Particle capture rate over 95%
Use pH range
2 - 12
Use the upper temperature limit
(*1) Specification of Membrane Components
100 Pieces (2 Section)
Effective Membrane Area
W754 x H1616 x D320
W754x H2820 x D320
(*1) The specifications of the unit can be negotiated separately
(*2) This value is the value obtained by the identification test, not the guarantee value